Distinctive Plastic Bottle Flower Craft

6 Mins read

If you wish to add some cute floral decor to your property, this plastic bottle flower craft is completely cute!  It’s a enjoyable and distinctive ornament that makes use of upcycled supplies and is gorgeous on any counter or shelf.  The most effective a part of this craft is that it may be so simply custom-made to suit any decor model.  Whether or not you need a vivid and colourful show, otherwise you need to make one thing extra subdued, that is straightforward to create. 

pink hanging flower decoration on table

Plastic Bottle Flower

This craft can also be very straightforward to make, so it’s nice for folks of all ages. All you want is a plastic bottle, some paint, and a bit little bit of creativity.  It’s an ideal craft to make with youngsters when making an attempt to encourage them to recycle.  You may make stunning flowers like this in any shade that you really want, they usually’re a enjoyable addition to any room of your property.  

If you wish to show actual flowers as a substitute of a pretend ones like this, then you can also make one other enjoyable recycling undertaking with this glowing rhinestone vase that’s made out of an empty plastic bottle.  It’s simply one other fantastic craft that can also be wonderful frugal house decor. 

Comparable Venture:  Cute Paper Hedgehog with Leaf Quills {Free Printable}

woman in pink holding pink bottle flower

What Ought to I Use For The Flower Base? 

If you end up making the flower base you need to use a powerful wire that may be molded into place. I like to make use of stiff jewellery or floral wire. Should you don’t have a sturdy wire which you can bend to form, you can even create a base out of a plate, piece of froth, or picket block.  Then you definately simply use a extra conventional floral wire to create the stem.  Should you aren’t positive about how sturdy the flower shall be, the heavier base is an effective selection. 

pink hanging plastic bottle flower on green wire stem with yellow background

What Ought to I Use For The Stem of the Flower?

The stem of the flower can also be made utilizing the identical floral wire. Should you do not need the wire to make use of, you need one thing that’s comparable which you can mildew into place however is powerful sufficient to carry the flower on the finish. Under are a couple of ideas that work nicely for the stem of the flower. 

  • A metallic hanger that has been reduce and bent right into a curved form. 
  • Dowels, sticks, twigs, skewers, or branches will be reduce and taped or glued collectively then lined with foam paper to create a stem and curved high. 
  • Use an current smaller hook for comparable decor and simply add your individual flower to the tip.
  • Should you do not need the wire, you could possibly additionally use molding clay. As soon as hardened, you’ll be able to wrap the clay in floral tape or one thing comparable to assist it keep sturdy sufficient to carry the plastic bottle.

Comparable Venture:  20 Extremely Inventive Methods To Reuse Outdated Bricks

plastic bottle hanging flower on tree stump

How Can I Customise My Plastic Bottle Flower?

Now that you understand how to make the fundamental plastic bottle flower, it’s time to get artistic and customise your individual!  There are some extra enjoyable methods to make it your individual beneath.  Decide and select what works for you, and create the last word flower ornament!

  • You possibly can paint the bottle any shade you need and in case you are particularly good with portray, you could possibly even make it a number of colours like a naturally swirled flower. 
  • Add some sparkle to the flower by spraying with glitter spray or brushing with glue and sprinkling on some glitter. 
  • Use completely different sizes and shapes of bottles to make your flowers look even completely different.  You possibly can even use a smaller bottle because the flower base then add a bigger bottle over it for a layered look of petals. 
  • Add pretend moss, sticks, pinecones, leaves, or acorns across the base to make a extra rustic flower ornament.
  • Lastly, don’t be afraid to get artistic together with your leaves! You need to use completely different colours of paper, and even actual leaves if you’d like. 

Simply have enjoyable and be artistic!  That is your ornament so use your individual model and abilities to make it actually match your property, decor model, and persona. 

Comparable Venture:  Tips on how to Make a Attractive Christmas Tree Out of Pinecones

green background behind pink plastic bottle flower

Provides Wanted

green foam wire and spray paint on white table

Tips on how to Make a Plastic Bottle Flower

To start, you’ll make the bottom to your flower.  That begins with a thick moldable wire that’s sturdy and can maintain its form.  Create a base by curving right into a circle on one finish.  

Then, you’ll curve the wire upwards about 12 inches, and curve over the tip to create a hook form.  

hand shaping wire

On the very finish of the hook, you’ll create a small circle for hanging the flower from later.  

Set this apart, and start reducing the glitter paper into strips to wrap across the wire.  I reduce it into 1/4″ strips. 

Start on the backside of the circle base, and begin wrapping the wire with the strips of glitter paper. 

lady wrapping wire with green glitter paper

Proceed this course of, overlapping and including further glue as wanted.  On the tip of the wire, go away the circle/hook uncovered. 

flower stem wrapped in glitter foam paper

Put aside the bottom, and start making your flower by reducing the highest 1/3 of a bottle off.  Discard the bottom of the bottle holding the highest lid finish solely. 

craft knife cutting plastic bottle on blue mat

Now, paint this piece pink and set it apart to dry fully. 

Comparable Venture:  21 Superbly Festive Christmas Centerpieces You Can Simply DIY

As soon as the paint has dried, use a soldering iron to make a gap within the middle of the lid on the bottle piece. 

soldering iron cutting hole in lid on pink bottle

Now, make a loop of rope or thick twine and string it by way of the opening within the lid in order that the loop is on the highest, and a knot is tied on the within of the lid to carry it in place.  

Depart the 2 ends lengthy sufficient to dangle down simply to the sting or a bit beneath the sting, of the reduce finish of the bottle. 

Glue the q-tips, one on each bit of rope dangling out from the underside of the flower. 

qtips being glued onto rope in flower

Minimize a chunk of inexperienced felt that’s round 8″ lengthy and three″ huge. 

Then, fold this in half a couple of instances, and reduce a “v” form onto one fringe of the felt. 

blue scissors cutting green felt

Unfold this after which wrap it across the neck of the bottle.  Glue into place so it covers the neck and higher a part of the flower with the scallops pointing towards the underside of the flower.  Trim any extra felt off the tip. 

Now, use tape or glue to connect pretend flowers alongside the stem you already created till you might be happy with the look. 

hot glue gun held against stem attaching fake leaves

Hook the rope on high of the flower by way of the circle on the finish of the wire stem.  

Comparable Venture:  Glad Paper Coronary heart Valentine’s Day Children Craft

Now you’ll be able to show your flower on any desk!

black flower pot next to fake flower craft

Extra Straightforward DIY Flowers

I really like making flowers so as to add to my house decor.  Whether or not it’s a paper flower, a plastic bottle flower like this, or one made out of yarn, beneath are some nice ideas which you can add to your crafting undertaking record.  Make these and add some stunning flowers to your property  Take the time to bookmark these ideas, print out the tutorials, or pin them on a Pinterest crafting board. 

Yield: 1

pink hanging flower decoration on table

Make this plastic bottle flower craft with upcycled supplies for a stunning ornament for any room of your property!

Energetic Time

Further Time

Whole Time
1 hour


Estimated Value


  1. Fastidiously curve the wire to create a spherical on the backside for the bottom of your hanging flower. 
  2. Then, curve the remainder upwards at a hook form angle. Add a small hook/circle on the very finish. hand shaping wire
  3. Now, reduce the glitter paper into 1/4″ strips. 
  4. Beginning on the backside spherical, start wrapping the wire with the glitter paper. green paper on circle base of wire
  5. Proceed, overlapping as wanted, till you’ve got lined the entire wire aside from the small circle on the tip. 
  6. Minimize the highest 1/3 of the bottle off and discard the bottom holding the lid finish. 
  7. Now, spray paint this pink and set it apart to dry. hand spraying bottle pink
  8. As soon as it has dried, use a soldering iron to make a gap within the middle of the lid. 
  9. Then, string thick yarn or white rope by way of the opening making a loop on the highest with two items dangling out from the bottom of the bottle. rope loop being pushed through top of pink bottle lid
  10. Glue a q-tip to every of those items so the bud of the q-tip dangles beneath the flower when held up. 
  11. Minimize a size of felt round 8″ lengthy and three” huge. 
  12. Now, fold the inexperienced felt in half, then in half once more. 
  13. Minimize alongside one facet making a “v” form. 
  14. Unfold this to see a scalloped/pointed edge. Then glue it across the lid of the bottle, so it covers the neck and lid however lays in opposition to the highest of the bottle with the “v” pointing downward. Trim off any extra on the tip. 
  15. Subsequent, glue or wrap pretend leaves across the stem you created earlier.  I added one each 3″ or so. 
  16. Lastly, hook the yarn from the highest of the bottle by way of the hook you added to the highest fringe of the hook stem so the flower dangles downward with the q-tip items displaying beneath the sting of the bottle. hand hanging plastic bottle flower on hook hanging plastic bottle flower on green table by potted tulips


Make your flower any shade you like.

Comparable Venture:  Tips on how to Make a Rustic Fragrant Christmas Tree Decoration

Really helpful Merchandise

As an Amazon Affiliate and member of different affiliate packages, I earn from qualifying purchases.

Completed Venture Gallery

plastic bottle pink flower on green stem by cinnamon sticks

Make this in a number of colours and add one to every desk round the home!

pink plastic bottle flower on green hook

Source link

Related posts

Upcycled Plastic Bottle Beaded Windchime

6 Mins read
Have you ever ever needed to make your individual stunning windchime? You possibly can with this incredible idea use a plastic bottle…

Upcycled Plastic Bottle Chicken Water Feeder

6 Mins read
On the lookout for a enjoyable and simple method to verify your native birds have recent water? Look no additional than this…

Upcycled Water Bottle Pig Flower Planter

6 Mins read
This lovely water bottle pig flower planter is a enjoyable means to brighten up your private home, workplace, or backyard area. This…
Sign up for our Newsletter and
stay informed