Distinctive Donkey Plastic Bottle Backyard Planter

7 Mins read

Searching for one thing completely different in a backyard planter? Take a look at our distinctive and cute little donkey plastic bottle backyard planter.  You by no means would have imagined what a number of previous empty bottles and paint may make!  That is produced from recycled plastic bottles and is the best approach so as to add some enjoyable persona to your backyard.  Fill it along with your favourite flowers or vegetation and luxuriate in watching them develop. This planter is the proper approach so as to add a singular contact to your out of doors area.

horse planter with white flowers outside in grass

Donkey Backyard Planter

In relation to one thing recycled, do-it-yourself, and cute, it’s a must to take a look at this straightforward donkey backyard planter. It’s made with recycled plastic bottles. It’s sturdy, weatherproof, and straightforward to make. Plus, you may make it in quite a lot of colours to match your model or to provide to somebody as a present.  Such a enjoyable assertion piece to your backyard or yard!

For those who just like the distinctive “character” of this, however don’t want one other planter, then try this upcycled tin can pig backyard decor.  It’s one other nice dialog starter so as to add to your entrance porch or backyard space. 

white flowers in donkey planter

What Ought to I Paint the Bottles With? 

I like to make use of silver for the donkey however you possibly can with one thing conventional like brown, grey, and even black. You may even wrap him in duct tape to make it much more sturdy. I like to make use of spray paint on these kind of initiatives as a result of it’s quick and straightforward and spray paint is cheap.

In order for you to have the ability to make smaller particulars, you wish to use acrylic paint. That allows you to paint with a paintbrush and get the smaller decorations on there.  In fact, it takes much more paint and time, so will not be as sensible for this challenge. 

TIP: For those who discover that the paint has hassle sticking to the plastic bottles, you possibly can tough it up with sandpaper to create texture for the paint to stay to.

silver donkey shaped planter on cobblestone path

Can I Make This A Horse As an alternative? 

You may flip this donkey backyard planter right into a horse as a substitute. The most important distinction is the ears.  You’ll additionally wish to make smaller ears since donkeys are identified to have longer ears.

Portray the planter brown, black, grey, or white would make extra sense for a horse, however you possibly can paint it any shade you need.  To differentiate it, you may additionally wish to add one thing for the mane on the again of the pinnacle and a braided longer tail on the top.  Rope or twine is superb for this. 

silver donkey shaped planter outside on lawn

Can This Maintain Actual Crops?

Since that is produced from plastic bottles, you possibly can undoubtedly use it with actual vegetation.  To make it extra environment friendly for actual vegetation, earlier than you add soil and flowers, use a drill or soldering iron so as to add a number of holes on the underside of the donkey physique for correct drainage.  

Then, you simply add within the soil and vegetation you wish to develop.  In fact, you possibly can add smaller pots inside this as a substitute of planting immediately into it, and even simply add a number of pretend flowers in foam so it seems actual however doesn’t have the maintenance of an actual plant. 

donkey painted silver with white horses inside on lawn by shrubs

What Methods Can I Make My Donkey Planter Distinctive?

There are various methods to make your donkey planter distinctive. You may add a shawl across the neck for some further shade or you possibly can add a bowtie. If you wish to get actually artistic, you possibly can even add glasses.

Different ideas embody giving them earrings on the ears, a mane, an even bigger tail, or including paint to the ft to appear to be it has painted toenails.  It is a nice solution to exhibit your persona and make your backyard planter distinctive.

woman holding donkey planter

Provides Wanted

empty plastic bottles and craft knives on white table

The way to Make a Donkey Flower Planter

Begin by cleansing and eradicating labels from all the bottles you can be utilizing.  I discover it finest to allow them to dry fully earlier than working with them, nevertheless it isn’t 100% crucial.  Then, you’ll minimize the lid finish off of the 4 smaller bottles, leaving 3/4 of the bottle and discarding the lid and neck. These would be the ft of your donkey. 

green lid being cut off top of bottle

Subsequent, lay the bigger gallon bottle on its aspect, hint then minimize out a rectangle or sq. from the highest/aspect.  This creates the outlet so that you can add flowers into it as a planter. 

scissors cutting out center of gallon plastic bottle

Now, flip the bottle over so the open aspect is on the underside, after which glue the 4 smaller bottles, minimize aspect to the massive bottle, to create the donkey ft. 

hand holding plastic bottle on top of larger water bottle

Sit this upright after which set it apart.  Now, you’ll start engaged on the donkey head.  Reduce the lid finish and round 1/4 of the highest of a 20-ounce bottle off.  

craft knife cutting into plastic bottle

Now, on both aspect of the bottle, minimize a 2″ by 3″ piece out.

Then, place this minimize aspect over the lid finish of the donkey bottle and glue it into place because the neck of the donkey. 

hand holdign plastic bottle to base of bottle

Reduce the final two 20-ounce bottles in half and discard the lid/neck ends. 

blue scissors cutting bottles in half

Then, push these collectively so they’re overlapping one another to type one bottle with ends on each side.  

bottles pushed together

Tape it across the center to safe it collectively. 

Now, use a number of the scrap plastic from the bottle leftovers to chop out and make tall ear shapes then set them apart. 

black marker cutting ear shape on plastic bottle

On one finish of the bottle, you simply made with two ends, minimize a 3″ slit proper on the sting of the bottoms. 

yellow craft knife cutting slits into plastic bottle

Subsequent, push the 2 earpieces into this slit and glue or tape them in place to safe them. 

Subsequent, glue this, with the ears on the entrance, onto the neck of the physique. 

lady in black and white holding plastic bottles together

Now, create a tail and glue or tape to the top of the donkey physique, reverse the pinnacle.  To do that, minimize one 1/2″x6″ strip of plastic.  Then, minimize ten smaller 1/4″x2″ strips of plastic.  

Tape these collectively to create a tail and curl the ends of the plastic to make it extra real looking. 

plastic bottle tail being taped together on white table

Tape this onto the again of the donkey. 

Spray paint your entire factor silver then set it apart to dry. 

woman gluing plastic bottles together

As soon as it’s dried, you should utilize white craft paint so as to add accents to the pinnacle, nostril, chest, and ft of the donkey then set this apart to dry. 

Add black dots of paint on the pinnacle to create the donkey nostrils.  

adding black nostrils with paint to end of silver and white bottle

Then, add googly eyes on the high of the pinnacle, just under the ears, and to the edges.  

googly eyes being added to side of donkey face

Add in your soil and flowers, or only a potted plant and show. 

silver donkey planter on stump

Extra Simple Planter Tutorials

I like including vegetation all through my garden and backyard in distinctive planters.  They’re a lot simpler to keep up than backyard beds for me.  So, under are a number of extra enjoyable ideas that can be utilized inside or exterior to plant or showcase flowers that you just love!  Just remember to bookmark these ideas, print out the tutorials, or pin them to Pinterest to make quickly. 

Yield: 1

silver donkey planter on stump

This cute donkey plastic bottle backyard planter is such a singular addition to your garden and backyard! Quick, straightforward, and frugal, it is an excellent planter idea!

Lively Time

Further Time

Whole Time
1 hour


Estimated Price


  1. Reduce the lid finish off of the 4 smaller bottles, leaving 3/4 of the bottle and discarding the lid and neck. four water bottles with lids cut off the top
  2. Then, lay the gallon-sized bottle on its aspect, and minimize a rectangle out from the aspect.  This would be the planter. 
  3. Flip the gallon bottle over so the opening is dealing with downwards. 
  4. Then, glue the 4 smaller bottles, minimize finish towards the underside of the bottle, to the bottom of this to create ft for the donkey. four bottles being glued to bottom of larger bottle
  5. Now, minimize the lid finish and 1/4 of the highest of the 20-ounce bottle off. 
  6. Reduce a 2″ by 3″ piece out of 1 aspect of the minimize finish of this bottle. blue scissors cutting angle on end of bottle
  7. Now, glue this bottle towards the neck finish of the gallon bottle, overlaying the lid. 
  8. Reduce the remaining two 20-ounce bottles in half.  Discard the lid ends. 
  9. Then, push the 2 bases collectively in order that they create one bottle with ends on each side.  Tape this within the center to safe. duct tape taping bottles together
  10. Use scrap plastic from the bottles not getting used to chop out two ear shapes and set them apart. blue scissors cutting plastic bottle
  11. On the bottle with two ends, minimize a 3″ slit alongside one of many bottoms. 
  12. Push the 2 ears by this slit and add glue or tape to safe them if wanted. hand adding plastic donkey ears into slits on bottle top
  13. Glue the pinnacle onto the highest of the piece that’s overlaying the lid on the gallon bottle. 
  14. Now, minimize a single 1/2″ by 6″ lengthy strip of plastic.  Then, 10 small 1/4″ strips of plastic round 2″ lengthy. hand cutting strips of plastic bottle
  15. Reduce a bit of tape, and lay the lengthy strip on one fringe of the tape. 
  16. Then place the smaller items on the opposite aspect of that tape to create “hair” on a tail. 
  17. Wrap the tape over this to safe, then tape it to the again of the donkey bottle with the “hair” hanging down. duct tape being wrapped around plastic bottles
  18. Now, spray your entire donkey silver and set it apart to dry. 
  19. As soon as it has dried, paint the top of the pinnacle/nostril, chest, and the underside of the ft with white craft paint.  Set this apart to dry. red paintbrush painting white around base of donkey planter feet
  20. You can too paint the tail white and a part of the ears white as an accent. 
  21. As soon as this paint has dried, add two dots of black paint on the top of the pinnacle to create nostrils. 
  22. Then glue on the googly eyes on the high of the pinnacle on the edges just under the ears. white flowers in donkey planter by white shelf


Use any sized bottles to make your planter to carry as many or as few flowers as you need.

Really useful Merchandise

As an Amazon Affiliate and member of different affiliate applications, I earn from qualifying purchases.

Completed Undertaking Gallery

silver donkey planter on table in front of white shelf

Reduce the ears shorter and switch this right into a horse as a substitute! 

bottle donkey with silver spray paint outside in front of trees

Source link

Related posts

Upcycled Plastic Bottle Beaded Windchime

6 Mins read
Have you ever ever needed to make your individual stunning windchime? You possibly can with this incredible idea use a plastic bottle…

Upcycled Plastic Bottle Chicken Water Feeder

6 Mins read
On the lookout for a enjoyable and simple method to verify your native birds have recent water? Look no additional than this…

Upcycled Water Bottle Pig Flower Planter

6 Mins read
This lovely water bottle pig flower planter is a enjoyable means to brighten up your private home, workplace, or backyard area. This…
Sign up for our Newsletter and
stay informed